Rockwell Hardness Tester
Test materials and parts with hardness over 20 degrees, such as crankcase, clutch, sprocket, etc.
Our products have passed CE, GS, EURO II, EPA certification, and our company is also certified with ISO9001-2000 standards.
Materials Check
Vickers Hardness Tester
Test materials with hardness below 20 degrees, such as pistons, cylinders, engine housing, aluminum products, etc.
Thermistor thermometer
Check temperatures of cylinders of chainsaws and brush cutters, to avoid over-heating and engine stall.
Run-out Tester
Check the stray value of crankshaft. A high stray value could lead to abrasion of oil seal and air leakage of cylinder which incurs failure starting of engine.
Pneumatic Measuring Instrument
Check if the cylinder bores are with proper values. A smaller bore may cause piston scraping; and a bigger bore may cause air leakage.
Magneto Test Stand
Check the flywheels to insure the ignition works normally. The ignition enables spark plug to continuously ignite while the speed is at 800 rpm during the startup.
Assembling Inspection
Air-tightness Check
Air-leakage check is carried out on engine parts during the assembling procedure.
Assembling Technique
We have a highly skilled assembling team, which ensures the products we assemble are 100% qualified.
Adjustment & Troubleshoot
Adjustment & Troubleshoot
After being assembled, every machine must go through adjustment and troubleshoot to make sure our customers receive products without quality problems.
Finished Product Inspection
Power Testing Room
Detect a series of testing data including durability, cylinder temperature, fuel consumption, torque, etc.,to ensure excellent working performance of our products.